Dimensional drawing
Installed equipment
Belt conveyors
Fixed, radial and tripper conveyors with belts from 500 to 1,200 mm and lengths from 9 to 100 m.
Features
- Several models: fixed, stackers, tripper and reversible.
- Built from UPN and LPN sections, structural tube and folded sheet.
- Light, semi-heavy, heavy and reinforced structures.
- Outputs from 20 t/h to 2,000 t/h.
Benefits
- Minimum maintenance cost.
- Major logistics savings in any quarry.
- For aggregates, mining and recycling of all kinds (C&D waste, MSW, compost, etc.).
Added value
- Rubber-lagged drive drum with diamond pattern.
- Tail scraper that follows the drum when it is tensioned.
- Tapered tail drum for self-centring of the belt.
- Shafts fixed to the drums with "Tollok" locking bushes.
Models and dimensions
| Model | B | L | Ø |
|---|---|---|---|
| CT-500 | 500 | 9–100 m | 406 |
| CT-600 | 600 | 9–100 m | 406 |
| CT-650 | 650 | 9–100 m | 406 |
| CT-800 | 800 | 9–100 m | 406 |
| CT-1000 | 1000 | 9–100 m | 508 |
| CT-1200 | 1200 | 9–100 m | 508 |
Belt, radial and tripper conveyors. B = belt width (mm), L = length (m), Ø = drum diameter (mm).
How much does each conveyor produce?
The output of a conveyor depends on the material it carries, its grading and density, as well as the inclination and speed of the belt. That is why we do not give a fixed figure: tell us about your material and we will size the model and output for your case.
Belt conveyors catalogue
11-page PDF with photos, features, drawings and dimensions.
Complete your plant
Cubi-Roc centrifugal mill
Horizontal-shaft mill for producing sand with a stable grading curve. Up to 150 t/h.
Vibrating screens
Aggregate screening in two, three or four decks, dry or with spray bars. Thirteen models, with screening areas from 2.5 to 14 m².
Sand washer
Industrial sand washing with maximum fines recovery. From 50 to 200 m³/h, four LAF models.