Dimensional drawing
Installed equipment
Aggregates and mining
Stone washers
Removal of clays and loams stuck to gravel. Four LGF models.
Features
- Built with two horizontal shafts and arms bolted perpendicular to them.
- Drive through planetary gear motors acting directly on the shafts, with synchronised operation.
- Water consumption between 1/3 and 1/4 m³/h per t/h produced.
- Used to wash gradings between 2 mm and 100 mm.
Benefits
- Removes a high percentage of the coating stuck to the outside of the stone.
- Removes the clays and loams that come with the feed material.
- Simple installation.
- Easy to operate.
Added value
- Direct drive from the gearbox avoids the heavy wear caused by large-diameter ring gear drives.
- Breaks up soft, weathered particles.
Models and dimensions
| Model | A | B | C | D | E |
|---|---|---|---|---|---|
| LGF-1 | 5815 | 4940 | 4400 | 2710 | 1700 |
| LGF-2 | 6515 | 5440 | 4950 | 3070 | 2250 |
| LGF-3 | 8015 | 6440 | 5880 | 3290 | 2970 |
| LGF-4 | 9415 | 7440 | 6780 | 3670 | 3850 |
Dimensions in mm as per drawing.
2026 catalogue
Stone washers catalogue
11-page PDF with photos, features, drawings and dimensions.
Related equipment
Complete your plant
Cubi-Roc centrifugal mill
Horizontal-shaft mill for producing sand with a stable grading curve. Up to 150 t/h.
Vibrating screens
Aggregate screening in two, three or four decks, dry or with spray bars. Thirteen models, with screening areas from 2.5 to 14 m².
Sand washer
Industrial sand washing with maximum fines recovery. From 50 to 200 m³/h, four LAF models.